As a long - time supplier of underground well pumps, I often encounter a question from customers: Can an underground well pump be used in a well with a low water table? This is a crucial concern, especially for those in regions where water sources are scarce or the water table is naturally low. In this blog, I'll explore this topic in detail, considering various factors related to well pumps and low - water - table wells.
Understanding Low Water Tables
A low water table means that the level of groundwater is significantly below the surface. This can be due to geographical features, long - term drought, or over - extraction of water in the area. In such wells, the depth from the wellhead to the water surface can be quite large. For example, in some arid regions, the water table might be 50 meters or more below the ground.
When dealing with a low water table, several challenges arise for well pump operation. First, the pump needs to be able to generate enough suction or pressure to lift the water from a greater depth. Second, the pump must be able to handle the potential for intermittent water supply. As the water table is low, the well may run dry during periods of high water demand or when the recharge rate of the aquifer is slow.
Types of Underground Well Pumps
There are different types of underground well pumps, each with its own characteristics and suitability for low - water - table wells.
Submersible Pumps
Submersible pumps are designed to be submerged in water. They work by pushing water to the surface rather than pulling it. This is an advantage in low - water - table wells because they can be placed closer to the water source, reducing the distance the water needs to travel. For instance, our Submersible Bore Pump is a great option for such scenarios. It is engineered to operate efficiently at greater depths and can handle the higher pressure requirements associated with lifting water from a low water table.
These pumps are also less likely to experience cavitation, a phenomenon where bubbles form in the water due to low pressure and can damage the pump impeller. Since submersible pumps are already underwater, the pressure around the pump is higher, reducing the risk of cavitation.
Jet Pumps
Jet pumps are typically installed above the well and use suction to draw water up. They can be either shallow - well or deep - well jet pumps. Shallow - well jet pumps are generally not suitable for low - water - table wells as they have a limited suction lift capacity, usually up to about 7 - 9 meters. Deep - well jet pumps, on the other hand, can handle greater depths but may not be as efficient as submersible pumps in very low - water - table situations.
Factors Affecting Pump Performance in Low - Water - Table Wells
Pump Capacity and Head
Pump capacity refers to the volume of water the pump can move per unit of time, usually measured in gallons per minute (GPM) or liters per second (L/s). The head is the height the pump can lift the water, which is crucial in low - water - table wells. A pump with a high head rating is needed to lift water from a greater depth. For example, if you have a well with a water table 30 meters below the surface, you need a pump that can generate enough pressure to lift the water to the desired height above the ground.


Our LISHIBA 6SJ Series: Top - Selling High - Quality Pump For Multiple Usage Scenarios is designed with a high head and sufficient capacity to meet the demands of low - water - table wells. It can handle large volumes of water while maintaining the pressure needed to lift it from significant depths.
Well Diameter
The diameter of the well also plays a role. A larger well diameter can allow for more water storage and a more stable water supply. It also provides more space for a larger pump or multiple pumps if needed. However, the pump size must be carefully selected to fit the well diameter without causing flow restrictions.
Aquifer Recharge Rate
The rate at which the aquifer replenishes the well is important. In low - water - table wells, if the recharge rate is slow, the well may run dry during periods of high water use. Pumps need to be able to handle this intermittent water supply. Some pumps are equipped with sensors that can detect when the water level drops and automatically shut off to prevent damage.
Advantages of Using an Underground Well Pump in a Low - Water - Table Well
Despite the challenges, using an underground well pump in a low - water - table well has several advantages.
Self - Sufficiency
Having your own well pump means you are not dependent on municipal water supplies. This is especially important in areas where water shortages are common or where the cost of municipal water is high. You can have a reliable source of water for various purposes, such as household use, Agricultural Irrigation Water Pump, or industrial applications.
Cost - Efficiency
In the long run, using a well pump can be more cost - effective. Once the initial investment in the pump and well installation is made, the ongoing cost of water is mainly related to the energy used to operate the pump. This can be significantly lower than paying for municipal water, especially for large - scale water users.
Precautions and Maintenance
When using an underground well pump in a low - water - table well, certain precautions and maintenance practices are necessary.
Regular Inspection
Regularly inspect the pump and its components for signs of wear and tear. Check the electrical connections, the impeller, and the seals. A damaged impeller can reduce the pump's efficiency, and a faulty seal can lead to water leakage.
Water Quality Monitoring
Monitor the water quality regularly. Low - water - table wells may be more prone to contamination, especially if the aquifer is close to sources of pollution. Poor water quality can damage the pump and pose health risks.
Pump Protection
Install a pump protection device, such as a pressure switch or a float switch. These devices can prevent the pump from running dry, which can cause overheating and damage to the pump motor.
Conclusion
In conclusion, an underground well pump can be used in a well with a low water table, but careful consideration of various factors is required. The type of pump, its capacity, the well diameter, and the aquifer recharge rate all play important roles in ensuring the pump operates efficiently and reliably.
If you are facing the challenge of a low - water - table well and need a high - quality underground well pump, we are here to help. Our range of pumps, including the LISHIBA 6SJ Series, Submersible Bore Pump, and Agricultural Irrigation Water Pump, are designed to meet the specific needs of low - water - table wells.
If you have any questions or would like to discuss your requirements in detail, please feel free to contact us. We look forward to the opportunity to work with you and provide you with the best well - pumping solutions.
References
- "Groundwater Hydrology" by Jacob Bear. This book provides in - depth knowledge about groundwater systems, including water table characteristics and aquifer recharge.
- "Pump Handbook" by Igor Karassik. It offers comprehensive information on different types of pumps, their performance, and applications, especially in challenging well conditions.





